KSP Series Single Stage Pelletizing Machine

Product Introduction

Application Materials

ABS PS regrind

Bottle regrind

HDPE pipe regrind

HDPE drum regrind

KSP series single stage pelletizing machine

The KSP series single screw extruding and Recycling granulating system is specialized for rigid plastic scrap. It combines functions of raw materials feeding, plasticization, granulating, and drying. This machine is suitable for after-crushing/shredding rigid flakes, such as PP PE ABS PS HIPS PC, etc.

The machine-made final uniform pellets/granules could be as injection molding, film blowing, or pipe extrusion application.

Machine parameters

Type		KSP80	KSP100	KSP120	KSP150	KSP180
Capacity(kg/h)		200-300	300-500	500-600	700-900	1000-1500
Energy consumption ratio(kWH/kg)		0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4	0.3-0.4
A/Length(mm)		12,890	13,780	14,570	15,530	16,450
B/Width(mm)		2,820	2,960	2,670	2,910	3,260
C/Height(mm)		3,370	3,530	3,530	3,690	4,000
Extruder	Screw Diameter(mm)	Φ80	Φ100	Φ120	Φ150	Φ180
	L/D	32-36	32-36	32-36	32-36	32-36
	Motor power(kW)	55-75	110-132	160	250	315-400
Filter (options)	Two positions plate type	■	■	■	■	■
	Two positions piston type	□	□	□	□	□
	Back flush piston type	□	□	□	□	□
	Automatic self-cleaning type	□	□	□	□	□
Down stream (options)	Water ring pelletizer	■	■	■	■	■
	Strand pelletizer	□	□	□	□	□
	Automatic strand pelletizer	□	□	□	□	□
	Underwater pelletizer	□	□	□	□	□

■standard □alternative

KSP

Product details

Screw loader

1. After crushing/shredding raw materials are fed into the screw loader, and conveyed into the single screw extruder by the screw loader.

2. Feeding speed adjustable by inverter controller according to the feeding amount.

3. The raw materials of conveying pipe are stainless steel, and the typical capacity is customized.

Single screw extruder

1. High-efficiency barrel and screw used for extruder with excellent plasticizing result and high output capacity.

2. Extruder equipped with protection cover, extruder running speed adjustable by inverter.

3. Adopt high wear resistant alloy material to ensure 1.5 times service life of normal one.

Degassing system

1. Double chamber design, realizing non-stop operation.

2. Equipped with vacuum pump and waste water tank.

3. Double vacuum degassing to get rid of the low molecular, moisture, and printing ink efficiency to improve the final plastic pellets /granules quality.

Plate type filtration

1. Single-board, dual-station design, with lifting rings to facilitate installation and maintenance.

2. Ceramic heaters are provided on both sides to maintain the temperature of the material.

3. Equipped with Gefran pressure sensor, when the pressure in front of the network is more than 12 MPa, it will prompt to change the screen.

Piston type filtration

1. Longer screen lifetime, reducing screen change frequency.

2. Easy to use and none-stop type: easy and quick screen change and do not need to stop the machine.

Auto-clean laser filter

1. The self-cleaning mesh changer is made of double-mesh cemented carbide with less wear and longer service life.

2. This type of screen changer can automatically clean the impurities in the screen plate, and reduce the drainage loss.

3. It can regulate the constant waste discharge according to the pressure It can reduce the cost of manual screen changer.

Pelletizier unit

1. Cutter blade materials: D2

2. Equipped with a shock-proof pressure gauge to measure discharge pressure.

3. New European design water ring pelletizer, cutting speed adjustable by inverter, PLC control speed according to melt pressure automatically to get uniform size granules.